NEW pic Bat Signal 1:9 and 1:6 Scale
Moderators: Scott Sebring, Ben Bentley
Forum rules
You must read the MERCHANDISE RULES before participating here.
You must read the MERCHANDISE RULES before participating here.
- burkestudio
- Posts: 0
- Joined: Wed Jun 18, 2014 8:43 am
Re: 1966 Bat Signal updated
Dang!! That is just too cool!!
-Jeremy
-Jeremy
Same Bat Time! Same Bat Channel!
Technical Artist & Designer
Facebook: Burke Studio
eBay: jerburke http://www.ebay.com/usr/jerburke?_trksid=p2047675.l2559
Etsy: BurkeStudio
Instagram: BurkeStudio
Technical Artist & Designer
Facebook: Burke Studio
eBay: jerburke http://www.ebay.com/usr/jerburke?_trksid=p2047675.l2559
Etsy: BurkeStudio
Instagram: BurkeStudio
Re: 1966 Bat Signal updated
That is awesome, really good job! That would make a great addition to my desk lol. Would you care to share the build process, materials etc?
- To The Batpoles!
- Posts: 0
- Joined: Mon Sep 10, 2012 10:00 pm
Re: 1966 Bat Signal updated
PLEASE say you will sell me one!!!
=Frank=
=Frank=
The Early Bird may get the Worm, but it's the SECOND Mouse that gets the CHEESE!
Re: 1966 Bat Signal updated
Pure awesomeness... now you have to make one in Mego scale for the Figure Toys Company line
"...The agony of my soul found vent in one loud, long and final scream of despair..." - Edgar Allan Poe
Re: 1966 Bat Signal updated
^^^ What he said, I'd be all over this if it was scaled up to 1/9th.
To the Bat-Elephant!!
Re: 1966 Bat Signal updated
Great work! Put me on the list of those who would buy one from you if you ever decide to make a little $ from your hobby.
Re: 1966 Bat Signal updated
Hi everyone, thx for the nice comments...
So I started this project by drawing a rough draft, then I created all 12 pieces to the model in auto cad.
All the pieces were 3d printed except the lense which is lexan.
I did some finish work on them, painted them and installed a 3w led chip powered by a 9v.. very bright.
So this weekend I'll make the battery housing and cover, and install an on/off switch
Oh and I guess I need to make a 1:9 scale as well
More photos to come....
So I started this project by drawing a rough draft, then I created all 12 pieces to the model in auto cad.
All the pieces were 3d printed except the lense which is lexan.
I did some finish work on them, painted them and installed a 3w led chip powered by a 9v.. very bright.
So this weekend I'll make the battery housing and cover, and install an on/off switch
Oh and I guess I need to make a 1:9 scale as well
More photos to come....
-
- Posts: 0
- Joined: Wed Sep 05, 2012 4:29 pm
Re: 1966 Bat Signal updated
If you ever decide to sell these, I would buy one from you in a heartbeat!
- Batfan Mike 4260
- Posts: 0
- Joined: Mon Feb 03, 2014 3:34 pm
Re: 1966 Bat Signal updated
Very Cool!! Nice work!!
Re: 1966 Bat Signal updated
Looks AMAZING!! Would look great on my desk!!
- Yellow Oval
- Posts: 0
- Joined: Mon Sep 03, 2012 8:57 am
Re: 1966 Bat Signal updated
tmmelo,
This is a very impressive and excellent to-scale repro. The only thing you'll need to add is a Chief O'Hara figure standing behind it looking at his wristwatch!
This is a very impressive and excellent to-scale repro. The only thing you'll need to add is a Chief O'Hara figure standing behind it looking at his wristwatch!
"Hmmm... I don't like the twist this joke is taking. Let us away! Let us away!"
Re: 1966 Bat Signal updated
Hi Everyone, ok so here's all 14 pieces... changed the base a bit for battery housing and the switch.
Now it's time for some paint and assembly