Batgirl 3D print

1966 TV show type Bat-Items found on eBay, Collectibles, etc.

Moderators: Scott Sebring, Ben Bentley

Forum rules
You must read the MERCHANDISE RULES before participating here.
User avatar
SketchCardsAndCovers
Posts: 2
Joined: Fri Jul 03, 2020 8:36 am

Batgirl 3D print

Post by SketchCardsAndCovers »

I just finished printing my model of Batgirl!
I had a couple of minor failures.

The belt and the things sticking off her gloves are a bit too thin and some pulled off with the supports so I'm going to thicken them up a bit.

but seriously I can't believe the eyelashes printed perfectly!!
...haven't printed the base yet so I stuck her in some clay to stand her upright.

print is 8 inches tall.

Image

I think I'm going to separate the boots from the legs in the next print

Image

Image

Image

Image
User avatar
Larry A.
Posts: 0
Joined: Thu Aug 13, 2015 12:08 pm

Re: Batgirl 3D print

Post by Larry A. »

CUTE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Larry
User avatar
Jimmy L. 66
Posts: 0
Joined: Mon Nov 24, 2014 5:45 pm

Re: Batgirl 3D print

Post by Jimmy L. 66 »

Very nice job. Do you sculpt this yourself, or find it online?
User avatar
Lou Szabo
Posts: 0
Joined: Sun Sep 09, 2012 8:22 pm

Re: Batgirl 3D print

Post by Lou Szabo »

Love a tooned version!
Some days you just can't get rid of a ... SHARK!
User avatar
Ben Bentley
Moderator
Posts: 1271
Joined: Fri Aug 17, 2012 2:31 pm

Re: Batgirl 3D print

Post by Ben Bentley »

I really like this stylized version you've come up with! I can only imagine that these would be really popular if you made them available like your trading cards.
User avatar
Larry A.
Posts: 0
Joined: Thu Aug 13, 2015 12:08 pm

Re: Batgirl 3D print

Post by Larry A. »

Ben Bentley wrote: Mon Mar 27, 2023 4:55 pm I really like this stylized version you've come up with! I can only imagine that these would be really popular if you made them available like your trading cards.
I know that I'd like to buy one..."If the Price is Right"!!!! :lol: :lol: :lol:
Larry
User avatar
SketchCardsAndCovers
Posts: 2
Joined: Fri Jul 03, 2020 8:36 am

Re: Batgirl 3D print

Post by SketchCardsAndCovers »

Thank you
Larry A. wrote: Sun Mar 26, 2023 7:57 pm CUTE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
User avatar
SketchCardsAndCovers
Posts: 2
Joined: Fri Jul 03, 2020 8:36 am

Re: Batgirl 3D print

Post by SketchCardsAndCovers »

I did. Thank you! It was built in Lightwave.
Jimmy L. 66 wrote: Sun Mar 26, 2023 10:22 pm Very nice job. Do you sculpt this yourself, or find it online?
User avatar
SketchCardsAndCovers
Posts: 2
Joined: Fri Jul 03, 2020 8:36 am

Re: Batgirl 3D print

Post by SketchCardsAndCovers »

Thank you! It's a possibility, but my model painting is pretty weak. I couldn't do anything till I get much much better.
Ben Bentley wrote: Mon Mar 27, 2023 4:55 pm I really like this stylized version you've come up with! I can only imagine that these would be really popular if you made them available like your trading cards.
User avatar
SketchCardsAndCovers
Posts: 2
Joined: Fri Jul 03, 2020 8:36 am

Re: Batgirl 3D print

Post by SketchCardsAndCovers »

Thank you! I may make a full set in this style.
Lou Szabo wrote: Mon Mar 27, 2023 12:18 am Love a tooned version!
User avatar
SketchCardsAndCovers
Posts: 2
Joined: Fri Jul 03, 2020 8:36 am

Re: Batgirl 3D print

Post by SketchCardsAndCovers »

My intention was to do that " posted in merchandise" but after painting the model I realized I was pretty bad at painting on a non-flat surface.
Completely different skill set than drawing on paper.

However, if you're someone who likes painting models... I could offer a kit. all the parts and the logo base plus, since printing the first one I've removed the chest logo and I print it as a separate piece so that will make painting much easier.

Image


Image

Larry A. wrote: Tue Mar 28, 2023 2:51 pm
Ben Bentley wrote: Mon Mar 27, 2023 4:55 pm I really like this stylized version you've come up with! I can only imagine that these would be really popular if you made them available like your trading cards.
I know that I'd like to buy one..."If the Price is Right"!!!! :lol: :lol: :lol:
User avatar
SketchCardsAndCovers
Posts: 2
Joined: Fri Jul 03, 2020 8:36 am

Re: Batgirl 3D print

Post by SketchCardsAndCovers »

Finished piece! looks perfect... from 4 feet away.

Image

Eyelashes are a female dog! I had no idea how much my hand shakes. or that I would ever need a 3 hair brush!
You may also notice the thingies "Is it Scallops?" on her gloves broke off when I removed the supports, so since then I thickened them up a good bit.

Image
User avatar
Cappy
Posts: 0
Joined: Tue Sep 04, 2012 12:46 pm

Re: Batgirl 3D print

Post by Cappy »

Those are great. I'm in. Actually if the stl's were available that would be preferred.
Saving up for an Elegoo Mars possibly Saturn resin printer. Be nice to print off the scale
I have a call for. Either way.

A series of "toonies" would awesome. As well as the 66 Batman series, there would most likely
be an interest in the Green Hornet, Kato and George Reeves Superman. Just sayin :D
User avatar
SketchCardsAndCovers
Posts: 2
Joined: Fri Jul 03, 2020 8:36 am

Re: Batgirl 3D print

Post by SketchCardsAndCovers »

Thanks! I'm thinking the same thing. Already have a guy on Facebook asking for a Green Hornet.

Cappy wrote: Thu Mar 30, 2023 2:34 pm Those are great. I'm in. Actually if the stl's were available that would be preferred.
Saving up for an Elegoo Mars possibly Saturn resin printer. Be nice to print off the scale
I have a call for. Either way.

A series of "toonies" would awesome. As well as the 66 Batman series, there would most likely
be an interest in the Green Hornet, Kato and George Reeves Superman. Just sayin :D
User avatar
Larry A.
Posts: 0
Joined: Thu Aug 13, 2015 12:08 pm

Re: Batgirl 3D print

Post by Larry A. »

Since I don't have a printer, I'd like to know approximately what something like this might cost as a kit, please?
Larry
Post Reply