Kato's Nunchuk 3D Printed Prop

The Green Hornet TV series and related topics

Moderators: Scott Sebring, Ben Bentley

Post Reply
User avatar
rsaffle
Posts: 2
Joined: Mon Mar 30, 2020 3:09 pm

Kato's Nunchuk 3D Printed Prop

Post by rsaffle »

This is my 100% 3D printed replica of the first screen used Nunchaku's Bruce Lee used as Kato in the episode "The Hunters and the Hunted"
Bruce designed the original ones and later changed the chain from 6 to 8 chains for better fluidity.
.
Attachments
kato a.jpg
gh color b.jpg
gh color e.jpg
gh color c.jpg
gh color d.jpg
show image 2.jpg
*See more 3D printed props @ https://www.instagram.com/saffledesigns/
User avatar
A. Pennyworth
Posts: 0
Joined: Mon Sep 03, 2012 6:24 am

Re: Kato's Nunchuk 3D Printed Prop

Post by A. Pennyworth »

Nice, how is the weight on these being 3-D printed? and if you hit something are they solid enough not to break? My home made broom stick version I made in my youth sure put knots in my head, when I missed, and all over anything I hit!!
User avatar
rsaffle
Posts: 2
Joined: Mon Mar 30, 2020 3:09 pm

Re: Kato's Nunchuk 3D Printed Prop

Post by rsaffle »

A. Pennyworth wrote: Thu Aug 26, 2021 12:49 pm Nice, how is the weight on these being 3-D printed? and if you hit something are they solid enough not to break? My home made broom stick version I made in my youth sure put knots in my head, when I missed, and all over anything I hit!!
Ha. I had a similar experience trying to use a cheap set myself. These actually have a real good weight to them. Unlike your watch These have a filler structure inside them making them pretty solid and weighty and they feel pretty realistic. I have spun them around a little but I'm not sure how they would stand up to constant convention type playing around. If I used a real chain they probably would fool most people. As far as hitting something...I wouldn't recommend it.. If I made a resin mold of them then I could break some heads. Lol
*See more 3D printed props @ https://www.instagram.com/saffledesigns/
User avatar
BATWINGED HORNET
Posts: 0
Joined: Fri Sep 07, 2012 5:32 am

Re: Kato's Nunchuk 3D Printed Prop

Post by BATWINGED HORNET »

rsaffle, you work never fails to amaze! Such attention to detail & professionalism!
Beneath Wayne Manor
User avatar
rsaffle
Posts: 2
Joined: Mon Mar 30, 2020 3:09 pm

Re: Kato's Nunchuk 3D Printed Prop

Post by rsaffle »

BATWINGED HORNET wrote: Fri Sep 10, 2021 3:13 pm rsaffle, you work never fails to amaze! Such attention to detail & professionalism!
Appreciate that sir! It's fun and I really enjoy digging through the episodes to find all of the images and details.
*See more 3D printed props @ https://www.instagram.com/saffledesigns/
User avatar
dell
Posts: 0
Joined: Sun Sep 30, 2012 6:12 am

Re: Kato's Nunchuk 3D Printed Prop

Post by dell »

Very impressive, but I want to see a 3-D print of Nora Clavicle's razor sharp knitting needle!
dell
User avatar
rsaffle
Posts: 2
Joined: Mon Mar 30, 2020 3:09 pm

Re: Kato's Nunchuk 3D Printed Prop

Post by rsaffle »

dell wrote: Sat Sep 11, 2021 7:42 am Very impressive, but I want to see a 3-D print of Nora Clavicle's razor sharp knitting needle!
I'll take that as a challenge! Lol
*See more 3D printed props @ https://www.instagram.com/saffledesigns/
Post Reply