Re-painting a Cowl

Costume making, prop building and other '66 Bat-related arts and crafts.

Moderators: Scott Sebring, Ben Bentley

Forum rules
Costume making, prop building and other '66 Bat-related arts and crafts. Great place for info and helpful tips. Proudly display your latest creation. Please keep it '66 Batman related otherwise it will be moved to OFF-TOPIC.

(NO SOLICITATION). If you're looking to BUY or SELL something, go to the MERCHANDISE SECTION. Even if you're trying to assemble a costume by buying or acquiring different crafted items rather than constructing or customizing them yourself, then it belongs in the MERCHANDISE SECTION. Don't even ask somebody if they're planning on selling something within this section.

Be sure to read the Board Rules as well before posting for the first time.

Thank you!
Post Reply
User avatar
rickrickrick
Posts: 0
Joined: Tue Sep 04, 2012 7:12 pm

Re-painting a Cowl

Post by rickrickrick »

There will be a lot of text and photos on this post, so be forewarned.

I greatly admire the craftsmanship of the artists on this board. I use Chuck's chest emblems, and have one of his cosplay cowls, and they're great - I have one of Alex's Bat Shields, and it's amazing - I have one of Renato's utility belts, and I love it - and I have two of Will's excellent cowls. But there's always been one thing about the second cowl I bought from Will that sort of bothered me. Whatever paint he used on the first mask, he used something else for the second one, and the black is not as intense - it's sort of grey. And the forehead wasn't quite as high on the second one as on the first one. So, after a lot trepidation, and experimentation, I decided to take my chances and re-paint the second cowl.
cowlrepaint1.jpg
Will's cowls are covered with jumbo spandex, so I did a lot of various paint samples on spandex. LOTS of failures! There was always at least one thing wrong with the paint - if the color was good, the coverage was bad; if it covered well, it cracked; etc, etc. I finally settled on Neopaque fabric paint, available at one of my local art stores. The black was very saturated and flexible, but it was a little thin, so I had to paint on multiple coats, and it was glossy, so I had to use the old art school trick of adding talcum powder to it to matte it down. Once I had the technique down to my satisfaction, I taped off the area of the cowl that I wanted to add paint to.
cowlrepaint2.jpg
The real trick was bringing my new paint up to the level of Will's so the paint would be even. I painted 5 or 6 layers onto the new area, and for the last couple, I lightly sanded where the two areas met to try to blend it better.
cowlrepaint4.jpg
Then I painted a final layer that covered my new paint and Will's, carefully painting around Will's eyebrow and nose lines.
cowlrepaint5.jpg
cowlrepaint6.jpg
cowlrepaint7.jpg
It's not 100% - if you look really closely, you can see the line where the two different paint sections meet, but overall, I consider it a great success. The higher forehead is much more to my liking, and the deeper black color is a big improvement. Hope this was interesting to some of you do-it-yourselfers out there. Cheers!

RRR
The most important thing in life is to be yourself. Unless you can be Batman. Always be Batman.
User avatar
AndyFish
Posts: 0
Joined: Mon Sep 03, 2012 6:42 am

Re: Re-painting a Cowl

Post by AndyFish »

Not a do it myselfer but I found it extremely interesting., excellent work!
User avatar
Chuck Williams
Posts: 0
Joined: Thu Aug 30, 2012 7:57 am

Re: Re-painting a Cowl

Post by Chuck Williams »

Well Done Rick!

This is an excellent example of the various shades and finishes of "black" paints that are out there.

I can't even remember how many paints I tried before I found what I liked. Dozens at least.
Eyebrow colors, even more.

Thanks for sharing!!!

Chuck...
Quick, Everyone, Flee for your lives, into the street!!!!

http://www.etsy.com/shop/WilliamsStudio ... eller_info
elmrgraham
Posts: 4
Joined: Wed Sep 05, 2012 4:25 am

Re: Re-painting a Cowl

Post by elmrgraham »

Excellent.
User avatar
Hedji
Posts: 2
Joined: Mon Sep 24, 2012 6:29 am

Re: Re-painting a Cowl

Post by Hedji »

Nicely done..and very ambitious of you!
User avatar
rickrickrick
Posts: 0
Joined: Tue Sep 04, 2012 7:12 pm

Re: Re-painting a Cowl

Post by rickrickrick »

Thanks for the kind comments.

It was definitely nerve-wracking - I could have totally ruined the paint job, and thereby the whole cowl!

My experiments convinced me that I had at least a small chance of success.

It went so well that I plan to find a brow/nose line color that I like better and re-paint those parts, too.

RRR
The most important thing in life is to be yourself. Unless you can be Batman. Always be Batman.
User avatar
hobbybuilder01
Posts: 0
Joined: Mon Sep 03, 2012 7:54 pm

Re: Re-painting a Cowl

Post by hobbybuilder01 »

As a person who modified my original cowl many times cutting the nose bridge and even breaking its nose to reshape it, I know how you felt. Great job on a very scary make it or break it endeavor
User avatar
BatBob
Posts: 0
Joined: Tue Sep 04, 2012 5:43 am

Re: Re-painting a Cowl

Post by BatBob »

Looks great!
Post Reply