Bat cave Atomic Pile
Moderators: Scott Sebring, Ben Bentley
Forum rules
Costume making, prop building and other '66 Bat-related arts and crafts. Great place for info and helpful tips. Proudly display your latest creation. Please keep it '66 Batman related otherwise it will be moved to OFF-TOPIC.
(NO SOLICITATION). If you're looking to BUY or SELL something, go to the MERCHANDISE SECTION. Even if you're trying to assemble a costume by buying or acquiring different crafted items rather than constructing or customizing them yourself, then it belongs in the MERCHANDISE SECTION. Don't even ask somebody if they're planning on selling something within this section.
Be sure to read the Board Rules as well before posting for the first time.
Thank you!
Costume making, prop building and other '66 Bat-related arts and crafts. Great place for info and helpful tips. Proudly display your latest creation. Please keep it '66 Batman related otherwise it will be moved to OFF-TOPIC.
(NO SOLICITATION). If you're looking to BUY or SELL something, go to the MERCHANDISE SECTION. Even if you're trying to assemble a costume by buying or acquiring different crafted items rather than constructing or customizing them yourself, then it belongs in the MERCHANDISE SECTION. Don't even ask somebody if they're planning on selling something within this section.
Be sure to read the Board Rules as well before posting for the first time.
Thank you!
Re: Bat cave Atomic Pile
Looks very impressive so far...love the painted tape look.
Like the turtle vs the hare....slow but steady wins the race.
Keep it up Charles...I am enjoying your progress.
Like the turtle vs the hare....slow but steady wins the race.
Keep it up Charles...I am enjoying your progress.
- Thefanboy59
- Posts: 0
- Joined: Mon Sep 03, 2012 7:50 pm
Re: Bat cave Atomic Pile
I'm glad your feeling better and back to working on your project. I am looking forward to the results.
- STP Swallowthispill
- Posts: 1
- Joined: Fri Aug 15, 2014 2:35 pm
Re: Bat cave Atomic Pile
redbird wrote:Looks very impressive so far...love the painted tape look.
Like the turtle vs the hare....slow but steady wins the race.
Keep it up Charles...I am enjoying your progress.
Thank you!
Do you think the tape will stay stuck or should I be worried about it peeling off?
Charles
- STP Swallowthispill
- Posts: 1
- Joined: Fri Aug 15, 2014 2:35 pm
Re: Bat cave Atomic Pile
Thefanboy59 wrote:I'm glad your feeling better and back to working on your project. I am looking forward to the results.
Yes I am feeling much better now I still have the occasional backache but it is not enough to stop me from completing the build. Thanks for the nice comment.
What do you think about the tape idea will it stay stuck or should I worry about it peeling?
Here is a picture of the actual AP legs you can see the lines which I am trying to replicate.
I think the legs are either metal duct or cardboard cylinders.
Looking at this photo I may have to use narrower tape I think my lines are too far apart.
What do you think?
Charles
- burkestudio
- Posts: 0
- Joined: Wed Jun 18, 2014 8:43 am
Re: Bat cave Atomic Pile
Charles,
You're definitely on the right track. Your tape idea to achieve the lines and texture was brilliant.
You seem to be putting so much great effort into this project... so my humble opinion would be to get some narrower tape, as you suggested.
I wonder if you could use a matte gloss coat over the paint, to keep the paint from possibly peeling???
Or, paint one as a test while you work on other parts of the AP. maybe by then you'll get a better idea if the paint will start to peel or not.
I've been following this build for some time. I always look forward to when you post something new.
Best of luck,
Jeremy
You're definitely on the right track. Your tape idea to achieve the lines and texture was brilliant.
You seem to be putting so much great effort into this project... so my humble opinion would be to get some narrower tape, as you suggested.
I wonder if you could use a matte gloss coat over the paint, to keep the paint from possibly peeling???
Or, paint one as a test while you work on other parts of the AP. maybe by then you'll get a better idea if the paint will start to peel or not.
I've been following this build for some time. I always look forward to when you post something new.
Best of luck,
Jeremy
Same Bat Time! Same Bat Channel!
Technical Artist & Designer
Facebook: Burke Studio
eBay: jerburke http://www.ebay.com/usr/jerburke?_trksid=p2047675.l2559
Etsy: BurkeStudio
Instagram: BurkeStudio
Technical Artist & Designer
Facebook: Burke Studio
eBay: jerburke http://www.ebay.com/usr/jerburke?_trksid=p2047675.l2559
Etsy: BurkeStudio
Instagram: BurkeStudio
- STP Swallowthispill
- Posts: 1
- Joined: Fri Aug 15, 2014 2:35 pm
Re: Bat cave Atomic Pile
burkestudio wrote:Charles,
You're definitely on the right track. Your tape idea to achieve the lines and texture was brilliant.
You seem to be putting so much great effort into this project... so my humble opinion would be to get some narrower tape, as you suggested.
I wonder if you could use a matte gloss coat over the paint, to keep the paint from possibly peeling???
Or, paint one as a test while you work on other parts of the AP. maybe by then you'll get a better idea if the paint will start to peel or not.
I've been following this build for some time. I always look forward to when you post something new.
Best of luck,
Jeremy
Thanks so much Jeremy I am going to try a narrower tape and also wind the tape at less of a degree of angle then I think the lines will be more accurate I just have to figure out a way to wind all the legs alike but that should not pose to much of a challenge.
I have more materials ordered for the catwalks so until that arrives I will concentrate on the legs.
Charles
Re: Bat cave Atomic Pile
I agree, maybe a slight bit smaller tape, but,,,,it looks FANTASTIC!! This it going to be just stunning when it's completed. Keep it going my friend!
- Lurky Mclurkson
- Posts: 2
- Joined: Mon Aug 10, 2015 1:32 am
- STP Swallowthispill
- Posts: 1
- Joined: Fri Aug 15, 2014 2:35 pm
Re: Bat cave Atomic Pile
Lurky where did you find these they are fantastic!Lurky Mclurkson wrote:You might find these interesting?
I am seeing detail that I was going to have to guess at from the photos I have thank you so much!
I can see now that the AP legs are most likely cardboard cylinders wrapped in what appears to be some kind of vinyl or plastic wrap. The pic with Batman on the ladder was a dead give away the material that the legs are wrapped in is wrinkled.
This is a great post you have made do you have more?
Charles
- Lurky Mclurkson
- Posts: 2
- Joined: Mon Aug 10, 2015 1:32 am
Re: Bat cave Atomic Pile
Thanks for the kind words. I was afraid they might be old bat-hat to you.STP Swallowthispill wrote:
Lurky, where did you find these? They are fantastic!
This is a great post you have made. Do you have more?
Found 'em at 'Getty Images' - Click on 'Editorial'/'Archival', then search 'Batman', 'Batman 1966', 'Adam West', anything along those lines.
I cherry-picked, but they're were others you might find useful.
I'm sure you've seen these, but possibly better quality.
- STP Swallowthispill
- Posts: 1
- Joined: Fri Aug 15, 2014 2:35 pm
Re: Bat cave Atomic Pile
Yes I have these but of poor quality these are great!Lurky Mclurkson wrote:Thanks for the kind words. I was afraid they might be old bat-hat to you.STP Swallowthispill wrote:
Lurky, where did you find these? They are fantastic!
This is a great post you have made. Do you have more?
Found 'em at 'Getty Images' - Click on 'Editorial'/'Archival', then search 'Batman', 'Batman 1966', 'Adam West', anything along those lines.
I cherry-picked, but they're were others you might find useful.
I'm sure you've seen these, but possibly better quality.
Can actually see more detail in them.
Thanks
Charles
- STP Swallowthispill
- Posts: 1
- Joined: Fri Aug 15, 2014 2:35 pm
Re: Bat cave Atomic Pile
Well here is a progress update!
I went to a print shop and got the catwalk layouts printed on one page instead of having to tape them together here are a couple of pics of the layouts.
The Top Catwalk:
The Middle Catwalk:
Here you see I have the styrene cut for the top catwalk awaiting assembly:
And here is the top catwalk assembled just needs some cleanup work and painting. But before I can do that I have to assemble the lower catwalk and drill the holes for the railings.
Here's another view of the top catwalk this is the underside of it:
Some may be thinking why could I not just use the catwalk I made earlier.
That one had two many flaws for one the legs would not fit in between the framework and it was not the same size as the bottom catwalk. That's what happens when you do not have a correct layout to base your measurements by. I have to give a big thumbs up to my son without him making the layouts I could not have started over so thanks Christopher.
Charles
I went to a print shop and got the catwalk layouts printed on one page instead of having to tape them together here are a couple of pics of the layouts.
The Top Catwalk:
The Middle Catwalk:
Here you see I have the styrene cut for the top catwalk awaiting assembly:
And here is the top catwalk assembled just needs some cleanup work and painting. But before I can do that I have to assemble the lower catwalk and drill the holes for the railings.
Here's another view of the top catwalk this is the underside of it:
Some may be thinking why could I not just use the catwalk I made earlier.
That one had two many flaws for one the legs would not fit in between the framework and it was not the same size as the bottom catwalk. That's what happens when you do not have a correct layout to base your measurements by. I have to give a big thumbs up to my son without him making the layouts I could not have started over so thanks Christopher.
Charles
- Lurky Mclurkson
- Posts: 2
- Joined: Mon Aug 10, 2015 1:32 am
- STP Swallowthispill
- Posts: 1
- Joined: Fri Aug 15, 2014 2:35 pm
Re: Bat cave Atomic Pile
Lurky Mclurkson wrote:A couple more.
Thanks for the pictures they are superb!
I went to the archives you mentioned and copied a bunch of pictures but these are nice having them in the thread it reminds me of how much more I have to do!
I am really worried about if this thing turns out like I am planning I am going to try to make the entire cave and the Bat machines with all those buttons and lights I don't know if I can make those.
I will worry about that when the time comes.
Charles
- Ben Bentley
- Moderator
- Posts: 1271
- Joined: Fri Aug 17, 2012 2:31 pm
Re: Bat cave Atomic Pile
Gotta love the good ole Getty archives.
You know we'd love to see you take on the whole the whole cave buddy
You know we'd love to see you take on the whole the whole cave buddy